Thank you very much Masuji, for all the work you've done and continually
updating your tremendous software. It's made all the difference for us as
3D stereo enthusiasts!
On a different note:
When you updated StereoPhoto Maker to include the clone tool a few years
ago (a tremendous addition by the way), it was immediately evident to me that
the tool could be used for creating entire conversions from 2D to 3D.
Although the procedure is a bit tedious because SPM was not programmed with
converting entire images in mind, I wrote a tutorial for the SPM conversion
procedure shortly after the implementation of the cloning tool, and have been
sharing it with a few 3D groups...
anaglyphs(-at-)yahoogroups.com and
3D-StereoviewXchange(-at-)yahoogroups.com
Some other individuals have also started doing conversions using the clone
tool via SPM as evident on "Flickr", "YouTube", and the Yahoo 3D
stereo groups.
At this time I would like to formally request that you
consider implementing a few features into StereoPhoto Maker to enhance
the ability for creating conversions through SPM. The program is
nearly a stand-alone application for this feature already. It just needs a
bit of focusing these capabilities together under a menu selection. A
couple of suggestions for enhancement might be...
1. A 2D-3D conversion section in the menu to include an
"eyedropper paint pallet". I've found that sometimes I need to go
outside SPM to better fix certain areas by painting a certain color for the
"fix". (This feature would also prove valuable for processing normal 3D
stereos).
2. A way to automatically empty the "Undo Buffer Clear" to keep the
program from hanging up because of the memory buffer becoming full. This
happens during conversions of large resolution images because of keeping in
memory the previous actions along with the memory required for higher resolution
images.
I have done over 200 full conversions and countless partial conversions
using SPM. A search on Flickr may provide even more examples from other
enthusiasts.
I have gotten many requests from strangers that would like to convert
images. I often ask them to join one of the two Yahoo groups I mentioned
above where I have my tutorial in the Group Files section.
I have attached the tutorial referenced above.
Sincere gratitude and warmest regards,
Brian L. Wallace
----- Original Message -----
Sent: Sunday, March 18, 2012 5:34
AM
Subject: [fuji3d] StereoPhoto Maker
Ver4.36
I added View/Save/Multi-conversion of 'Half width SBS' and
'Half height A/B' in the latest version of SPM(Ver4.36).
http://stereo.jpn.org/eng/stphmkr/index.html
See
this page.
http://stereo.jpn.org/eng/stphmkr/new_spm.jpg
Masuji
------------------------------------
Yahoo!
Groups Links
<*> To visit your group on the web, go
to:
http://groups.yahoo.com/group/fuji3d/
<*>
Your email settings:
Individual Email |
Traditional
<*> To change settings online go
to:
http://groups.yahoo.com/group/fuji3d/join
(Yahoo! ID required)
<*> To change settings via
email:
fuji3d-digest(-at-)yahoogroups.com
fuji3d-fullfeatured(-at-)yahoogroups.com
<*>
To unsubscribe from this group, send an email to:
fuji3d-unsubscribe(-at-)yahoogroups.com
<*>
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
