Anaglyph glasses should now be
worn.
Step 2. Using the Lasso
Tool completely drag and surround the shown area #1. Release mouse
after area is surrounded and the lassoed
area will remain as a continuous
light dotted line. For the sake of easy recognition a thick, white line in
the illustration represents the
lassoed area.
When surrounding include
the ana's red ghosts by creating a circle that's slightly larger than the
area. It's not necessary
to conform exactly to
the content within the lassoed area.
Notice that there's a
separate surrounded area #2 at upper right. That's an
additional area that gets likewise simultaneous treatment as
#1.
Before creating this second
lassoed area the Shift key must be depressed until the second encirclement is
begun. Immediately
thereafter, the Shift key can be
released until the encirclement is completed. This procedure should be
observed if even
more areas are to be
lassoed. If the Shift key is not depressed at startup of a new
encirclement, all lassoed areas will disappear
and they will have to be
re-drawn. Once all desired areas are properly lassoed go to Step 3. Make
sure that the areas to be corrected
are still encircled by dotted
lines, thus retaining their active status.
Marshall