Franz--
It may be undesirable for two flashes to be used while set apart at slightly
different angles when mounted on a bar
because the resulting light and shadows affecting a subject may cause
rivalry. Sometimes using the flash from only
one of the cameras during dual exposures can yield good results. Try a much
slower shutter speed on the camera being
used without flash, and shoot off both cameras simultaneously. In effect
the flash from the camera set at a faster shutter speed
may act as the "shutter" for the non-flash camera.
Marshall
----- Original Message -----
From: "Frans Van de Poel" <fransvandepoel(-at-)
To: <anaglyphs(-at-)yahoogrou
Sent: Friday, April 03, 2009 2:36 PM
Subject: [Anaglyphs] Re: My first
>
>> ... This is my first SDM stereoview made with a pair of Canon A590s.
>
> Congratulations Marshall and welcome to the club
> (I am also using A590IS's with SDM).
> This SDM is so over-documented that it is hard to find the basics
> (after more than a year I still don't know how to use the flashes)
> but from your pictures I see that you got things up and working: bravo!
>
>
>
>
> ------------
>
> Attention new and "digest" subscribers: http://abdownload.
> Anaglyphs archive link that includes the photos as well.Yahoo! Groups
> Links
>
>
>
>